|
Engine and Cooling |
Clutch |
Body and Brake |
Maintenance, Fuel, Tune Up |
|
Transmission, Gearcase, Driveline |
Suspension |
| Name | SKU | Price | Thumbnail Image | Description | |
|---|---|---|---|---|---|
| Counter Balancer Puller | 220202 | $34.95 | ![]() |
Counter Balancer Puller - For removing counter balance shaft from crankcase on liquid cooled 2-stroke ATVs. | Product Details |
| Roll Pin Removal Tool | 900325 | $34.95 | ![]() |
Roll Pin Removal Tool - To drive out roll pins on front propshaft and driveshafts | Product Details |
| Clutch Sheave Clamp Tool | 900102 | $9.95 | ![]() |
Clutch Sheave Clamp Tool - Holds sheave in place when collapsed. For changing clutch weights without removing outer cover or clutch from crankshaft | Product Details |
| 1/8" Square Driver Bit | 900736 | $7.95 | ![]() |
1/8" Square Driver Bit - For removing square drive crate screws. Body Hexagonal to fit drill. | Product Details |
| Polaris ATV rebuild kit | 710200 | $315.00 | ![]() |
Crankshaft Rebuild Kit - All Components needed to disassemble and assemble Polaris ATV crankshaft (Kit 8710000 recommended for Polaris Snowmobile and PWC dealers). | Product Details |
| CV Boot Clamp Pliers | 900721 | $49.95 | ![]() |
CV Boot Clamp Pliers: Required to secure clamping bands for CV drive shaft boots | Product Details |
| Crankshaft/Water Pump Seal Installation Kit | 220201 | $139.00 | ![]() |
Crankshaft/Water Pump Seal Installation Kit - Prevents damage to crankshaft and main bearing during installation. Includes tools needed to install water pump seals on 4-stroke ATVs. | Product Details |
| Slotted Nut Socket | 220203 | $48.00 | ![]() |
Slotted Nut Socket - For removal and installation of crankshaft slotted nut on Polaris EC35/38 PL engines (350 and 400 2-stroke ATVs). | Product Details |
| Polaris Clutch offset Alignment Tool | 220119 | $44.95 | ![]() |
Polaris Clutch offset Alignment Tool - OEM # 2872292 | Product Details |
| Air Chuck | 900309 | $7.95 | ![]() |
Air Chuck | Product Details |
| Water Pump Mechanical Seal Puller | 220205 | $109.95 | ![]() |
Water Pump Mechanical Seal Puller - For removal of water pump mechanical seal without engine removal and disassembly. For 4-stroke ATV and Ranger engines. Replacement T-Handle available. | Product Details |
| Drive Clutch Spider Removal and Installation Tool | 200110 | $42.50 | ![]() |
Drive Clutch Spider Removal and Installation Tool - | Product Details |
| Oil Filter Wrench | 900232 | $19.95 | ![]() |
Oil Filter Wrench - To remove spin-on type oil filters used on Polaris 4-stroke engines. 2 1/2" / 64mm. | Product Details |
| Clutch Pin Punch | 900326 | $32.50 | ![]() |
Clutch Pin Punch - To remove and replace spider weight pins. | Product Details |
| Clutch Holding Fixture | 200105 | $84.95 | ![]() |
Clutch Holding Fixture - EBS | Product Details |
| Ball Joint Replacement Tool | 220410 | $85.00 | ![]() |
Ball Joint Replacement Tool: For removal and installation of lower ball joints on models with pressed-in ball joints on the front strut casting | Product Details |
| Slotted Nut Socket | 220204 | $69.95 | ![]() |
Slotted Nut Socket - For removal and installation of slotted nut on Fuji/Robin 4-Stroke engines. | Product Details |
| Polaris Clutch Compression Tool | 900101 | $109.95 | ![]() |
Clutch Compression Tool - To compress drive clutch for assembly and dissasembly. Also helps in disassembly and assembly of driven clutch. | Product Details |
| EBS Bushing Replacement Kit | 220214 | $159.95 | ![]() |
EBS Bushing Replacement Kit - Needed to remove and replace EBS clutch bushings. Requires piston pin puller 200210 (sold seperately). | Product Details |
| Valve Seat Reconditioning Kit | 900242 | $575.00 | ![]() |
Valve Seat Reconditioning Kit - For reconditioning valve seats on Polaris 4-stroke ATV engines. | Product Details |